|
C1_10P_ (1)
General size of body and the start of the build.
Date: 08/13/2016
Views: 863
|
C1_10P_ (2)
Plan
Date: 08/13/2016
Views: 682
|
C1_10P_ (4)
Plywood ready to be glued
Date: 08/13/2016
Views: 784
|
|
C1_10P_ (7)
Clamped stack.
Date: 08/13/2016
Views: 839
|
C1_10P_ (9)
Starting the top plate of the body.
Date: 08/13/2016
Views: 721
|
C1_10P_ (10)
Top plate almost cut. A rotatory table on a metal cutting mill makes short work of this type of cut.
Date: 08/13/2016
Views: 771
|
|
C1_10P_ (14)
Top plate finished. Two bearings in the middle will be what the head rotates on.
Date: 08/13/2016
Views: 891
|
C1_10P_ (16)
Working on the lower plate of the body. I missed getting shots of this being turned on the lathe. I get to working and forget to document.
Date: 08/13/2016
Views: 847
|
C1_10P_ (19)
Top plate sitting on 8 inch pvc coupler cut to length and lower plate
Date: 08/13/2016
Views: 1206
|
|
C1_10P_ (22)
Choppers head frame, not glued
Date: 08/21/2016
Views: 1102
|
C1_10P_ (23)
turned bottom plate, not sanded, but all angles included.
Date: 08/21/2016
Views: 1068
|
C1_10P_ (24)
Chopper head, a different view.
Date: 08/21/2016
Views: 1093
|
