|
test for radar eye 1
just making a few test runs on my wooden radar eye. thanks to hansagan for idea!
Date: 10/01/2010
Views: 933
|
wooden radar eye 2
tomorrow ill get the jigsaw out with dad and then sand for years. sigh.....
Date: 10/01/2010
Views: 891
|
RADAR EYE 3
Just finished cutting R2's radar eye.
Date: 10/01/2010
Views: 1211
|
|
RADAREYE 4
Now, just lots of sanding and then paint. Hopefully this one works out!
Date: 10/01/2010
Views: 869
|
FINISHED EYE 5
Getting there. I have to make the side box a bit deeper and sand the back so it can sit on the dome nicely. not far now!
Date: 10/01/2010
Views: 1071
|
Sanded and smoothed 6
for my build, i plan on building most of the parts by wood. styrene i'll use for skins, and other small pieces. I'll definitley be buying parts from america but bits that can be scratch built will be .Gonna get some hypo metallic blue paint and primer tom
Date: 10/01/2010
Views: 1456
|
|
Made a lens 7
I previously brought a globe so i could turn it into R2's head. I only had to use 1 half. so I measured, cut and spray painted.
Date: 10/02/2010
Views: 1310
|
Temporary lens 8
I'll find a better one later, but its a good start. my first piece for R2!!!!!!
Date: 10/02/2010
Views: 1253
|
Primed!
another hour or two and I will spray it with metallic blue. I have given it 3 coats of grey primer and filled it with 'Selley's' wall filler. Hope it turns out alright. its got a few scratch's ( really REALLY small ones). maybe with this blue on it, its n
Date: 10/03/2010
Views: 954
|
|
Finisho!
cut, sanded, primed, filled, painted dried! First completed piece.
Date: 10/04/2010
Views: 899
|
side box
Date: 10/04/2010
Views: 912
|
Scratche's
These are the scratches I was hoping wouldn't show. but I to late now.
Date: 10/04/2010
Views: 1443
|
