|
Shoulder flange tool
Tool for mounting PVC shoulder Flanges. It's made from a 3/4 MDF disc and a 1/4' MDF disc glued onto it.
Date: 06/30/2010
Views: 400
|
Shoulder flange tool.2JPG
Tool for mounting PVC shoulder Flanges.
It gives a good clamping surface for gluing the flange to the PVC body tube. It also ensures the PVC flange is round for gluing.
Date: 06/30/2010
Views: 438
|
Shoulder flange tool 3
Shoulder Flange tool being clamped
Date: 07/03/2010
Views: 525
|
|
Shoulder alignment plate 1
A scrap Piece of PVC pipe that I cut a hole in just the size of the Shoulder Flange.
Date: 07/03/2010
Views: 450
|
Shoulder alignment plate 2
Clamped in place on the tube.
Date: 07/03/2010
Views: 373
|
Shoulder alignment plate 3
This will keep the shoulder flange from moving when clamping.
Date: 07/03/2010
Views: 412
|
|
Shoulder alignment plate 4
Date: 07/03/2010
Views: 459
|
Body front left
The finished etched tube. Resin parts are just taped in place.
Date: 07/03/2010
Views: 420
|
Body front right
The finished etched tube. Resin parts are just taped in place.
Date: 07/03/2010
Views: 449
|
|
Body front
The finished etched tube. Resin parts are just taped in place.
Date: 07/03/2010
Views: 545
|
Body back
The finished etched tube.
Date: 07/03/2010
Views: 440
|
Milling charge door1
Milling the Recharge door frame for an opening door. After the door outline has been etched, I set the endmill to a cutting depth of .083 and then etch the outline again.
Date: 10/18/2010
Views: 424
|
