|
20160926_160100.jpg
Initial pull of inner and one outer foot. Cure time was about 3 weeks.
Date: 05/13/2017
Views: 410
|
20160926_160112.jpg
Initial pull of inner and one outer foot. Cure time was about 3 weeks.
Date: 05/13/2017
Views: 392
|
20161022_173216.jpg
The side had a crack in it. A mending plate was formes using styrene ans marine-grade epoxy.
Date: 05/13/2017
Views: 391
|
|
20161027_193803.jpg
The pulls has a good bit of bubbles in them, these were later filles and resculpted.
Date: 05/13/2017
Views: 432
|
20161027_192826_LLS.jpg
Apoxie Sculpt ended up being the best option for repair.
Date: 05/13/2017
Views: 406
|
14859833_10209652804370311_8381160553458649044_o.jpg
Date: 05/13/2017
Views: 236
|
|
20161027_193803.jpg
Closer look at the pre-filled pull.
Date: 05/13/2017
Views: 429
|
20161028_002833.jpg
A rough, pre-sanded fill.
Date: 05/13/2017
Views: 394
|
20161101_180039_LLS.jpg
A closer look at the missing edge.
Date: 05/13/2017
Views: 433
|
|
20161101_182159.jpg
Missing edge filled.
Date: 05/13/2017
Views: 391
|
20161029_180341_LLS.jpg
Sanded flush.
Date: 05/13/2017
Views: 377
|
20161108_172103.jpg
The fiberglass foot is a near-perfect match for the 3D printed files. The Astromech will be a hybird of wood (Senna Frame), #D printed parts, styrene skin, resin, and fiberglass feet. The R2ATL metal drive frame will also be used.
Date: 05/13/2017
Views: 417
|
