|
C1_10P_ (1)
General size of body and the start of the build.
Date: 08/13/2016
Views: 818
|
C1_10P_ (2)
Plan
Date: 08/13/2016
Views: 612
|
C1_10P_ (4)
Plywood ready to be glued
Date: 08/13/2016
Views: 695
|
|
C1_10P_ (7)
Clamped stack.
Date: 08/13/2016
Views: 788
|
C1_10P_ (9)
Starting the top plate of the body.
Date: 08/13/2016
Views: 646
|
C1_10P_ (10)
Top plate almost cut. A rotatory table on a metal cutting mill makes short work of this type of cut.
Date: 08/13/2016
Views: 706
|
|
C1_10P_ (14)
Top plate finished. Two bearings in the middle will be what the head rotates on.
Date: 08/13/2016
Views: 822
|
C1_10P_ (16)
Working on the lower plate of the body. I missed getting shots of this being turned on the lathe. I get to working and forget to document.
Date: 08/13/2016
Views: 801
|
C1_10P_ (19)
Top plate sitting on 8 inch pvc coupler cut to length and lower plate
Date: 08/13/2016
Views: 1128
|
|
C1_10P_ (22)
Choppers head frame, not glued
Date: 08/21/2016
Views: 1063
|
C1_10P_ (23)
turned bottom plate, not sanded, but all angles included.
Date: 08/21/2016
Views: 1026
|
C1_10P_ (24)
Chopper head, a different view.
Date: 08/21/2016
Views: 1045
|
