PSI Diffuser Blocks for mounting PSI LEDs inside your dome.

Budget Skins are sheets of .040" (1mm) styrene with Chani's skins cut file scored onto them. These skins are for builders that don't mind taking some time working with their parts, but at the same time, eliminating the need for another template. Every cut line is scored into the styrene, so with a utility knife, an optional straight-edge, and a little time, you can have a complete set of skins that won't set you back. Please see the photo above. That's what you will receive. Included are Front Outer, Front Inner, Back Outer and Back Inner skins scored onto four sheets of 24"x36" sheets. Another advantage of using these skins is that, because they are already scored into the plastic, it's easier to freehand your final cuts because your knife won't want to slip out of the pre-scored groove very easily. Also, if you're careful, it's possible with most panels to just bend the score lines slightly and pop them out.

This is a commemorative Dome Drive Wheel for the Atomic Pickle Dome drive (current modiular versiom). It is a direct replacement for the current modular wheel, and can be ordered for either the Pittman or Banebots dome drive kits. If you have an older one piece wheel, they will be available before 1 January 2010. The wheel is CNC machined from aluminum, and engraved using a CNC mill. More information at: www.atomicpickle.com

This is a vacuum-formed white or black .09 shinny ABS. The skirt comes with an 18.25" molded ring.The mold was casted from the original fiberglass skirt that Bret Landon ran a few years back. Bret’s skirt is believed to be molded from an original screen-used astromech.

These are vacuum formed acrylics lenses. Two lenses available – Black (opaque) is screen accurate (standard issue) and Bronze (transparent). The bronze lens is optical grade quality for those who plan to put a camera behind it. A lot of research went into creating the profile to match the height of the original lenses. NOTE: Please specify what color lens you want in your invoice. Otherwise a standard black lens will be sent.

A set of logic surrounds (includes both two fronts and a rear). These are cast directly from the aluminium set that TimCo did a few years back. The surrounds should match the inside profile of most of the domes offered from this group.